|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
LITE-ON ELECTRONICS, INC. Property of Lite-On Only Features * Super thin (0.80H mm) Chip LED. * Ultra bright AlInGaP Chip LED. * Package in 8mm tape on 7" diameter reels. * Compatible with automatic placement equipment. * Compatible with infrared and vapor phase reflow solder process. * EIA STD package. * I.C. compatible. Package Dimensions Part No. LTST-C171KGKT Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is O Lens Water Clear Source Color AlInGaP Green 0.1mm (.004") unless otherwise noted. Part No. : LTST-C171KGKT BNS-OD-C131/A4 Page : 1 of 6 LITE-ON ELECTRONICS, INC. Property of Lite-On Only Absolute Maximum Ratings At Ta=25J Parameter Power Dissipation Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width) Continuous Forward Current Derating Linear From 25J Reverse Voltage Operating Temperature Range Storage Temperature Range Wave Soldering Condition Infrared Soldering Condition Vapor Phase Soldering Condition Suggest IR Reflow Condition : LTST-C171KGKT 75 80 30 0.4 5 -55J -55J to + 85J to + 85J Unit mW mA mA mA/J V 260C For 5 Seconds 260C For 5 Seconds 215C For 3 Minutes Part No. : LTST-C171KGKT BNS-OD-C131/A4 Page : 2 of 6 LITE-ON ELECTRONICS, INC. Property of Lite-On Only Electrical Optical Characteristics At Ta=25J Parameter Symbol Part No. LTST- Min. Typ. Max. Unit Test Condition IF = 20mA Note 1 Note 2 (Fig.6) Measurement @Peak (Fig.1) Note 3 Luminous Intensity IV C171KGKT 20.0 35.0 mcd Viewing Angle 2c 1/2 C171KGKT 130 deg Peak Emission Wavelength f P C171KGKT 574 nm Dominant Wavelength f d C171KGKT 571 nm Spectral Line Half-Width Gf C171KGKT 15 nm Forward Voltage VF C171KGKT 2.0 2.4 V IF = 20mA Reverse Current IR C171KGKT 100 g A VR = 5V VF = 0 f = 1MHZ Capacitance C C171KGKT 40 PF Notes: 1. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE eye-response curve. 2. c 1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity. 3. The dominant wavelength, f d is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. Part No. : LTST-C171KGKT BNS-OD-C131/A4 Page : 3 of 6 LITE-ON ELECTRONICS, INC. Property of Lite-On Only Typical (25 C Electrical Ambient / Optical Characteristics Unless Otherwise Curves Noted) Temperature Part No. : LTST-C171KGKT BNS-OD-C131/A4 Page : 4 of 6 LITE-ON ELECTRONICS, INC. Property of Lite-On Only Cleaning Do not use unspecified chemical liquid to clean LED they could harm the package. If clean is necessary, immerse the LED in ethyl alcohol or in isopropyl alcohol at normal temperature for less one minute. Suggest Soldering Pad Dimensions Package Dimensions Of Tape And Reel Notes: 1. All dimensions are in millimeters (inches). Part No. : LTST-C171KGKT BNS-OD-C131/A4 Page : 5 of 6 LITE-ON ELECTRONICS, INC. Property of Lite-On Only Notes: 1. Empty component pockets sealed with top cover tape. 2. 7 inch reel-3000 pieces per reel. 3. The maximum number of consecutive missing lamps is two. 4. In accordance with ANSI/EIA 481-1-A-1994 specifications. Part No. : LTST-C171KGKT BNS-OD-C131/A4 Page : 6 of 6 |
Price & Availability of LTST-C171KGKT |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |